Celdas Hay 9 productos.

Mostrando 1 - 9 de 9 items
  • The Dr. Bob's Cell is our smallest electrochemical cell kit, enzyme and catalysis studies, development of electrochemical sensors, basic research into battery mechanisms, and determination of redox potentials of inorganic complexes represent a few of its many applications.  Designed for flexibility and convenience, this cell kit can hold any of Gamry’s...

  • The EuroCell™is a general-purpose electrochemical cell available in jacketed and unjacketed versions.  The standard kits are ideal for corrosion measurements while the rotated electrode kits that are ideal for rotated disk, ring-disk, and rotating cylinder experiments.  Working Volume: Between 50 mL and 200 mL Available in jacketed and unjacketed versions

  • The FlexCell, used to determine the Critical Pitting Temperature, is designed to counteract a problem that plagues most other flat sample designs -- crevice corrosion around the specimen seal.  First popularized by Avesta Steel, the cell utilizes a flooded gasket seal design to inhibit crevice corrosion between the sample and its holder.  This simple, yet...

  • The MultiPort™ Corrosion Cell is a one-liter electrochemical cell that is designed to maximize flexibility. Its unique two-piece design can accommodate a wide range of sample geometries and makes it easy to clean. The cell top has seven access ports—more than enough to run the ASTM G5, G59, or G61 Standards. The MultiPort™ is available in both a...

  • The ParaCell™ Electrochemical Cell Kit is designed for convenient mounting of a wide variety of flat samples. The design of the ParaCell™ places the working electrode and either a graphite counter electrode or a second working electrode in an opposed geometry. The cell is designed so that large and bulky samples can be accommodated on either end for...

  • The PTC1™ Paint Test Cell is a low-cost sample cell for electrochemical testing of coated samples. The PTC1™ can also be used to test bare metal samples using PortHoles™ Electrochemical Sample Masks.  Perfect for testing of painted metal specimens using EIS

  • The Lithium Battery Electrochemical Cell Kit has been designed for electrochemical testing of lithium battery materials.  The electrodes and holders are designed to hold foils and electrode materials in different configurations as explained below. Available: Lithium Battery Materials Half Cell Kit, Full Cell Kit, and Standard Cell Kit Cell Volume - up 25 mL

  • Gamry’s Battery Holders are designed for four-terminal Kelvin-type measurements.  The coin cell holder can accommodate 2016, 2025, and 2032 sized cells while the cylindrical holder is designed for 18650 sized cells.   Each holder can hold two cells and includes a jumper bar that can be used to place the batteries in series. 4-terminal Kelvin-type...

  • PortHoles™ Electrochemical Sample Masks define a known area of the sample surface for electrochemical testing: 1, 3, or 10 cm2.  They also serve to reduce crevice corrosion when samples are sealed to a cell with an O-ring, as with Gamry’s ParaCell™ and PTC1™.

Mostrando 1 - 9 de 9 items