AFG1000 Arbitraria / Generador de funciones Ver más grande

AFG1000 Arbitraria / Generador de funciones

AFG1000

Nuevo producto

Con un ancho de banda de 25 MHz o 60MHz, 2 canales de salida, 1 mVpp a 10 Vpp de amplitud de salida a través del ancho de banda completo, el Generador Arbitrario / Funcional de Tektronix AFG1000 genera todo tipo de formas de onda necesarias en un laboratorio. Lo más importante es que ofrece la mejor relación calidad-precio en la línea Tektronix de generadores de funciones arbitrarias.

Más detalles

Más

Caracteristicas

Beneficios

Canal doble, ancho de banda de 25MHz con salida de 1mVpp a 10Vpp; Resolución vertical de 14 bits y resolución de frecuencia de 1uHzGenere formas de onda más precisas para obtener resultados de laboratorio más precisos.
50 formas de onda arbitrarias incorporadas con modos continuo, de modulación, de barrido y de ráfagaGenere todo tipo de formas de onda necesarias en un laboratorio.
Pantalla TFT LCD dedicada de 3.95 ", panel frontal y menú fáciles de navegarFacilitar el acceso de los usuarios a los experimentos.
Con el apoyo de TekSmartLab ™Haga que sea conveniente para los usuarios educativos monitorear y configurar múltiples instrumentos en un laboratorio.
Contador de frecuencia incorporado de 200 MHz, 6 dígitosMedir la frecuencia / período / pulso ancho / ciclo de trabajo de una manera precisa sin un contador de frecuencia independiente.
Garantía estándar de 5 añosUna mejor experiencia de usuario garantizada por la calidad y el servicio de Tektronix.

 

Specifications

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Channels
Number of channels
Built-in waveforms
Built-in waveforms
Sine, Square, Pulse, Ramp, Noise, and 45 frequently used arbitrary waveforms
General characteristics
Sine waves
Range
AFG1022AFG1062
1 μHz to 25 MHz1 μHz to 60 MHz
Sine wave in burst mode
2 mHz to 25 MHz2 mHz to 30 MHz
Effective maximum frequency out
25 MHz60 MHz
Amplitude flatness (1 Vp-p), typical
 
      <10 MHz
±0.4 dB±0.5 dB
      ≥10 MHz and ≤25 MHz
±0.7 dB 
      ≥10 MHz and ≤60 MHz
 ±0.9 dB
Harmonic distortion (1 Vp-p)
 
      ≤10 MHz
< -50 dBc< -60 dBc
      >10 MHz
< -50 dBc< -47 dBc
Total harmonic distortion
< 0.2% (10 Hz to 20 kHz, 1 Vp-p)
Spurious (1 Vp-p), typical
< -45 dBc
Phase noise, typical
1 MHz: < -110 dBc/Hz at 10 kHz offset, 1 Vp-p
Residual clock noise, typical
-57 dBm
Square wave
Range
AFG1022AFG1062
1 μHz to 12.5 MHz1 μHz to 30 MHz
Rise/fall time, typical
<12 ns<10 ns
Jitter (rms), typical
<1 ns<500 ps
Overshoot
<5%
Ramp wave
Range
AFG1022AFG1062
1 μHz to 1 MHz1 μHz to 2 MHz
Linearity, typical
≤ 0.1% of peak output at 10% - 90% of amplitude range, at 1 kHz, 1 V p-p , 50% symmetry
Symmetry
0.0% to 100.0%
Pulse wave
Range
AFG1022AFG1062
1 μHz to 12.5 MHz1 μHz to 30 MHz
Pulse width range
40 ns to 999 ks17 ns to 999 ks
Pulse width resolution
1 ns or 4 digits
Pulse duty
<1 MHz, 0.1% to 99.9% (limitations of pulse duty width apply)
≥1 MHz, 50% fixed≥1 MHz, 50% fixed
Edge transition time, typical
<12 ns, fixed<10 ns, fixed
Overshoot, typical
<5%
Jitter (rms), typical
<1 ns<500 ps
Noise
Noise bandwidth (-3 dB)
AFG1022AFG1062
25 MHz50 MHz
Noise type
White Gausian
DC
Range
AFG1022AFG1062
-5 V to +5 V, 50 Ω load
-10 V to + 10 V, open circuit or high Z load
Arbitrary waveform
Range
AFG1022AFG1062
1 μHz to 10 MHz1 μHz to 30 MHz
Arbitrary waveform in burst mode
2 mHz to 10 MHz2 mHz to 30 MHz
Effective analog bandwidth (-3 dB)
30 MHz60 MHz
Non-volatile memory
64 MByte
Memory
 
      Length
2 to 8,192 2 to 1 M-point
      Sampling rate
125 MS/s300 MS/s
Vertical resolution
14 bits
Rise and fall time
< 10 ns< 8 ns
Jitter (rms), typical
< 6 ns
Frequency
Resolution
AFG1022AFG1062
1 μHz or 12 digits
Internal reference stability
±1 ppm at 0 - 40 °C
Internal reference aging
±1 ppm per year
Amplitude
Range (50 Ω load)
 
      ≤25 MHz
AFG1022AFG1062
1 mVp-p to 10 Vp-p1 mVp-p to 10 Vp-p
      >25 MHz
-1 mV p-p to 5 V p-p
Range (Open circuit or high Z load)
 
      ≤25 MHz
2 mVp-p to 20 Vp-p2 mV p-p to 20 V p-p
      >25 MHz
-2 mV p-p to 10 V p-p
Accuracy
±(1% of setting +1 mVp-p), (1 kHz sine waveform, 0 V offset)
Resolution
1 mVp-p, 1 mVrms or 4 digits
Units
Vp-p, Vrms
Output impedance
50 Ω (typical)
Local impedance setting
Selectable: 50 Ω, 1 Ω to 10.000 kΩ, High Z (adjusts displayed amplitude according to selected load impedance)
Isolation
No floating ground, signal ground connected to chassis ground
Signal output protection
Short-circuit tolerance, main output automatically disabled when over current
DC offset
Range

±(5 Vpk– Amplitudep-p/2), 50 Ω load

±(10 Vpk– Amplitudep-p/2), open circuit or high Z load

Accuracy
±(1% of |setting| + 1 mV + 0.5% of amplitude (Vp-p))
Resolution
1 mV or 4 digits
Modulation

Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022.

The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes.

Amplitude modulation
Carrier waveforms
Sine, square, ramp, arbitrary, except DC and noise
Source
Internal / external
Internal modulating waveforms
Sine, square, ramp, noise, arbitrary
Internal AM frequency
2 mHz to 20 kHz
Depth
0.0% to 100.0%
Frequency modulation
Carrier waveforms
Sine, square, ramp, arbitrary, except DC and noise
Source
Internal / external
Internal modulating waveforms
Sine, square, ramp, noise, arbitrary
Internal modulating frequency
2 mHz to 20 kHz
Frequency deviation

(limited by carrier waveform type)

AFG1022AFG1062
2 mHz to 12.5 MHz2 mHz to 30 MHz
Phase modulation
Carrier waveforms
Sine, square, ramp, arbitrary, except DC and noise
Source
Internal / external
Internal modulating waveforms
Sine, square, ramp, noise, arbitrary
Internal PM frequency
2 mHz to 20 kHz
Phase Deviation
0° to 180°
Amplitude shift keying

(AFG1062 only)

Carrier waveforms
Sine, square, ramp, arbitrary, except DC and noise
Source
Internal / external
Internal modulating waveforms
50% duty cycle square
ASK rate
2 mHz to 100 kHz
Frequency shift keying
Carrier waveforms
Sine, square, ramp, arbitrary, except DC and noise
Source
Internal / external
Internal modulating waveforms
50% duty cycle square
FSK rate
2 mHz to 100 kHz
Phase shift keying

(AFG1062 only)

Carrier waveforms
Sine, square, ramp, arbitrary, except DC and noise
Source
Internal / external
Internal modulating waveforms
50% duty cycle square
PSK rate
2 mHz to 100 kHz
Pulse width modulation

(AFG1062 only)

Carrier waveforms
Pulse, ≤1 MHz
Source
Internal / external
Internal modulating waveforms
Sine, square, ramp, arbitrary, except DC and noise
PWM frequency
2 mHz to 20 kHz
Deviation
0.0% to 50.0% of pulse period
Sweeping

Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022.

The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes.

Carrier waveforms
Sine, square, ramp, arbitrary (AFG1062 only)
Minimum start-stop frequency
1 μHz
Maximum start-stop frequency
Sine
AFG1022AFG1062
25 MHz60 MHz
Square
12.5 MHz30 MHz
Ramp
1 MHz2 MHz
Type
Linear, logarithmic
Direction
Up / down
Sweep time
1 ms to 500 s ± 0.1%
Trigger sources
Internal, external, or manual
Burst

Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022.

The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes.

Waveforms
Sine, square, ramp, pulse, arbitrary except DC and noise
Types

AFG1022: count (1 to 50,000 cycles), infinite, gated

AFG1062: count (1 to 1,000,000 cycles), infinite, gated

Start phase
-360° to +360°
Trigger sources
Internal, external, or manual
Internal trigger interval
(40 ns or (cycles x period) to 500 s) ± 1%
Gate source
External trigger
Frequency counter
Function
Frequency, period, positive pulse width, duty cycle
Frequency range
100 mHz to 200 MHz
Frequency resolution
6 digits
Coupling mode
AC, DC
Voltage Range and Sensitivity, DC coupled (non-modulation signal)
100 mHz to 100 MHz
250 mVp-p to 5 Vp-p (AC + DC)
100 MHz to 200 MHz
450 mVp-p to 3 Vp-p (AC + DC)
Voltage range and sensitivity, AC coupled (non-modulation signal)
1 Hz to 100 MHz
250 mVp-p to 5 Vp-p
100 MHz to 200 MHz
450 mVp-p to 4 Vp-p
Pulse width and duty cycle measure
1 Hz to 10 MHz
Input impedance

1 M Ω in parallel with 100 pF

High frequency noise restraint (HFR)
On / Off (HFR frequency = 500 kHz)
Sensitivity
Low, middle, or high
Trigger level range
-2.5 V to +2.5 V
Auxiliary inputs and outputs
External modulation input
Input frequency range
DC to 20 kHz
Input voltage range
All except FSK: ±1 V full scale, FSK: 3.3 V logic level
Input impedance
12 kΩ (typical)
External trigger input
Level
TTL-compatible
Slope
Rising or falling (selectable)
Pulse Width
>100 ns
External reference clock input
(Shared with Frequency Counter Input)
Impedance
400 Ω, AC coupled
Requested Input voltage swing
100 mVp-p to 5 Vp-p
Locking range
10 MHz ±9 kHz
External reference clock output
Frequency
10 MHz
Impedance
50 Ω, DC coupled
Amplitude
1.6 Vp-p into 50 Ω load
Communication interface
USB
Host and device, USB TMC compliance
Display
Display type
3.95-inch
Display resolution
480 by 320 
Display colors
65,536 
Menu and online help languages
Menu and online help languages
English and Simplified Chinese
Power source
Supply
220-240 VAC, 100-120 VAC, 50/60 Hz, CATⅡ
Consumption

AFG1022: Less than 28 W

AFG1062: Less than 35 W

Fuse

110 V: 250 V, F1AL

220 V: 250 V, F0.5AL

Warm-up time
30 minutes (typical)
Physical characteristics
Dimensions (W, H, D)
230 × 110 × 306 mm (9.0 × 4.4 × 12.1 in)
Weight
Net
3.4 kg (7.5 lbs)
Shipping
4.7 kg (10.3 lbs)
EMC environment and safety
Temperature
Working
0 ℃ to 40 ℃ (32 °F to 104 °F)
Storage
-20 ℃ to 60 ℃ (-4 °F to 144 °F)
Relative humidity (non-condensing)

Operating: ≤ 80%, +0 °C to +40 °C (+32 °F to +104 °F)

Non-operating: 5% to 90%, < +40 °C (+104 °F)

Non-operating: 5% to 80%, ≥ +40 °C (+104 °F) to ≤ +60 °C (+140 °F)

Altitude
Operating: up to 3,000 m (9843 ft.)

Non-operating: up to 12,000 m (39,370 ft)

Cooling method
Fan cooling
EMC compliance
European Union
EN 61326-1 
Australia/NZ
CISPR 11, Class A
Safety compliance
UL 61010-1
 
CAN/CSA-C22.2 No. 61010-1
 
EN 61010-1
 
IEC 61010-1

Reseñas

Escribe tu opinión

AFG1000 Arbitraria / Generador de funciones

AFG1000 Arbitraria / Generador de funciones

Con un ancho de banda de 25 MHz o 60MHz, 2 canales de salida, 1 mVpp a 10 Vpp de amplitud de salida a través del ancho de banda completo, el Generador Arbitrario / Funcional de Tektronix AFG1000 genera todo tipo de formas de onda necesarias en un laboratorio. Lo más importante es que ofrece la mejor relación calidad-precio en la línea Tektronix de generadores de funciones arbitrarias.

Accesorios

Descargar